Motor Enamelled Aluminum Flat Wire

Motor Enamelled Aluminum Flat Wire

Production range Thickness of conductor a: 0.80-5.6mm conductor width dimension b:2.00-16.00mm. The width ratio of recommended conductors is 1.4. Please contact us if you choose the above range. Conductor material Paint BaoBian line with a soft copper flat wire comply with the provisions of the...

Send InquiryChat Now

Production range

Thickness of conductor a: 0.80-5.6mm conductor width dimension b:2.00-16.00mm.

The width ratio of recommended conductors is 1.4.

Please contact us if you choose the above range.


Conductor material

Paint BaoBian line with a soft copper flat wire comply with the provisions of the GB5584.2-2009, the resistance of the 20 degrees Celsius was no greater than 0.01724 ohms/m, according to the requirements of the different mechanical strength, half hard copper conductor of the specifications of the extension strength Rp0.2 recommendations are as follows:

C1Rp0.2 (>100~180)N/ mm2C2Rp0.2(greater than 180~220)N/mm2C3Rp0.2(greater than 220~260)N/mm2.

Enameled flat wire with soft aluminum flat wire conforms to gb5584.3-2009.

The resistivity at 20 degrees centigrade is not greater than 0.02801 ohm mm2/m, depending on the insulation requirements of different electrical appliances, it can be used for 0.06-0.11mm or thick paint film 0.12-0.17mm, hot.

The self-adhesive layer of adhesive coating is 0.03-0.06mm. Our company USES lossy device.

Please contact us for special requirement on film thickness.


Hot Tags: motor enamelled aluminum flat wire, China, manufacturers, suppliers, factory, wholesale, buy, customized, free sample
Related Products
Inquiry